Interview 2015:

OLEDs für die Beleuchtung – endlich raus aus der Nische?
Interview 2015

Wie sich flexible OLEDs automatisiert fertigen lassen

Artikel Elektronikpraxis Septemer 2019
Artikel 2019

Auszeichnung als ´inVISION Top Innovation 2015´

Die Imaging-Fachzeitschrift inVISION hat die OLED-Backlight-Beleuchtung seelector Lux OLED von hema electronic zur Top Innovation 2015 gewählt. Die Jury würdigt damit den Beitrag, die Themen Bildverarbeitung und optische Messtechnik weiter voran zu bringen. An der Abstimmung zum innovativsten Produkt des Jahres nahm neben der inVision-Redaktion eine unabhängige Jury von Experten teil. Mehr Informationen...

zum inVISION-Newsletter 01/15

The European OLED100.eu project developed a new OLED lighting panel that is the largest to date: a 33x33cm2 panel. The new panel offer 25lm/W at 1000 cd/m2 luminance. This relatively good efficiency was achieved using ou-coupling and an efficient RGB OLED stack. The panels were fabricated at the Gen-2 line at the Fraunhofer IPMS.

Bild

The new panels are based on the on-substrate tiling concept - with 5 segments connected in series. The 33x33cm2 panel itself is seamless and so can be tiled to create larger panels. The active area on each panel is 828cm2 aperture ratio of 76%).

OLED Projekt- und Netzwerkmanagement

OLEDs als Beleuchtungskomponenten für die IBV Organisches Licht

Anwendungsartikel in inVision Februar 2014

Netzwerkmanagementeinrichtung

Technologie- und Innovationspark Jena GmbH
Randolf Margull
Geschäftsführer
Hans-Knöll-Straße 6
D–07745 Jena
Fon: +49 (36 41) 675–100
Fax: +49 (36 41) 675–111

gefördert durch